ATV LED Light Bars & Pods

Yes, many riders are now adding LED lights bars and pods to their ATV/UTV or side by side. Not only does the addition of LED lighting help avoid emergency situations and illuminate the path ahead, but many riders are adding RGB lights to make their nighttime offroading adventure more colorful!

Yes, these are made to be connected to a 12V battery and the Extreme LED harnesses include the recommended fuses and relays.

Besides the light bars, pods, and LED whips, Extreme also offers underglow lights, rock lights, mirrors, and a variety of universal mounts.

When adding an LED light to your ATV, it is important to check a few things. Each LED light will have a different amp draw, meaning each light will require different things. For a low amp draw LED light pod or scene light, these can be ran off a direct current with no fuse or relay, connected straight to the battery. For a larger LED light bar or pod that might have a bigger amp draw, you will want to have a relay and at least a 20 amp fuse in line with the light bar.

Yes, most four wheelers use a 12v battery that can power an LED light. Make sure you use the right relays and fuse when powering a larger LED light.

LED light bars are great for providing extra light when off-roading or doing work early or late in the day.

Yes, you can run most LED lights off of a 12V battery.

Mounting a UTV LED light might change per person and UTV. It is important to mount it where you will need more light. To mount an LED light bar, you will want to choose a secure and strong point on your UTV. If you want a secure option, go with a universal tube mount, cradle mount, or a bracket built specifically for your UTV.

The new Honda Talons come with pre-wired switches that have no power. These switches are just an On/Off switch that has no immediate use. These are for adding accessories to your ATV. If you wish to use them, you will need to connect your constant power from your harness to the black wire and the switch leg to the blue wire. There will be no ground connected to these switches.