Wiring & Electrical Accessories

Choose one of the universal wiring harness and switch options below to make wiring up your new lights a snap. Comes with everything you need. Just hook up the red wire lead to the battery and the black to a ground, then plug in the light and click the switch and you're lighting up the night!

These two position 12V 20 Amp rocker switches replace the factory switch on any of our wiring harnesses, allowing you to control your LED light(s) with style. These switches have 5 pins and are SPST (Single Pole Single Throw) meaning they can be integrated into dash/rocker lighting to control the illumination of the icon; the lettering is illuminated at all times. These switches are 1.75" tall and 1" wide and come in multiple laser engravings.

These switches were made specifically for our Extreme Series X6/X6S Amber and White Light Bars. These control the clear spot and amber flood lights separately and are labeled accordingly on the switch. These switches are easy to replace, simply remove the old switch at the connector and plug in the new one! These come with either 20" wire or 40" wire that connects to our quick disconnect multi-color switch harness to help you get the best fit for your build.

These pigtails are for doing your own wiring and have raw wires on one side and a connector on the other side. The length of these varies but they are usually 3 to 6 inches long. If you are looking to extend your wiring harness and don't need the connector parts, we have wiring harness extensions or complete wiring harnesses available.

Add extra length to your LED light bar wiring harness with our wiring extensions, or use a splitter to turn 1 DT connection into 2! If buying by the foot, enter the footage needed and then hit add to cart.

These parts are for when you are doing your own wiring or fixes. These go on the end of the raw wires and include the connectors and necessary parts (no wiring included). We also have full wiring harnesses, wiring harness extensions, wiring harness pigtails, and replacement fuses & relays available.

If you're a do it yourself person like many of our customers, you might want to replace harness parts yourself. These fuses and relays are simple to replace on any harness. We also have replacement connector parts or wiring pigtails if you just need the connector with a short bit of wire. But of course, if you're the type of person that just wants to plug it in and go, we always have our full wiring harnessesthat make installation a breeze!

Relay holders are used to help organize your relays under the hood. One relay holder holds up to 3 relays one per prong. Choose between a universal mount with M8 rivet nuts (may require holes to be drilled) or bolt-on options for the 4Runner and Tacoma with bolts to fit the pre-drilled nuts in the engine compartment.